Code CR1200 McKesson HIS Quick Start - Manual (Page 10)

C005947_02_McKesson_BMA_QuickStartGuide 8
I. CodeXML® Bluetooth® Modem Firmware Version Instructions
APPENDIX A
To ensure a consistent experience with Code products, it may be necessary to check the firmware versions of the Code Reader
and the CodeXML® Bluetooth® Modem. Below are step by step instructions. The responses from the reader or modem will
appear to the host PC similar to decoded data. If using USB Keyboard mode, the data can be viewed by opening Microsoft Word
or Notepad.
Format is: PPPPUUUUXXXE
P: Processor Firmware Version
U: USB Firmware Version
E: If 1, modem is pre-emptible (Processor Firmware 0170+)
Reader Version Information USB Keyboard Mode
CodeXML® Bluetooth® Modem Version Information
Format is: Xap/iAAAABBBBRRRRSSSSSSSSSS
A: Application version
B: Boot version
R: Radio Version
S: Serial Numbe r
II. Code Reader Firmware Version Instructions
Scan the Reader Version Information code below to output the firmware version number. If modem processor version is 0160 or
earlier, you will scan the USB Keyboard Mode code and connect it to a USB cable.
1. Connect to the CodeXML® Bluetooth® Modem by reading the QuickConnect Code on the
modem.
2. Scan the Code Below to output the CodeXML® Bluetooth® Modem version information.