Code CR2500 Factory Default Settings - Manual (Page 3)

C004674_ 01_CR2500_CR3500_User_Manual_Appendix_B 3
CR2500 / CR3500 - Serial (RS-232) Default Settings
You must scan the Serial (RS-232) Commuincation Settings Code in either the CR2500 or CR3500 User Manuals
to switch the reader to Serial (RS-232) Communication Mode. When enabled your CR2500 or CR3500 will default to
the following settings:
Mode: Serial (RS-232) One Way Mode
Baud Rate 57600
Stop Bits 1
Data Bits 8
Parity None
CR2500 / CR3500 - USB Default Settings
Your CR2500 or CR3500 will recognize when the USB cable is detached or the Bluetooth radio is out of range and
automatically switch into batch mode with the following settings.
Auto Storage Erase ON
Send and Store OFF
Auto Send ON