Compuprint 4247-L03 - Manual (Page 60)

Setting the Parallel Interface Parameters
Table 12. Interface Type
EMUL. OPTIONS PARALL INTERFACE
PARALL INTERFACE 1284 BIDIR. I/F or
CX. PARALLEL I/F or
SERIAL INTERFACE
or SELECT IN HOST
LAN INTERFACE
1284 BIDIR. I/F Bidirectional IEEE 1284 parallel interface.
CX. PARALLEL
I/F Centronics type parallel interface (monodirectional).
Setting the Select-In Signal:
1284 BIDIR
SELECT-IN HOST or
SELECT-IN ON or
DATA BITS 8
SELECT-IN
HOST The printer checks the SELECT-IN signal coming from the host.
SELECT-IN ON The SELECT-IN signal of the parallel interface is ignored and treated
always as ON.
Number of Data Bits:
SELECT-IN HOST
DATA BITS 8 or
DATA BITS 7 or
INP. BUFFER 2K
Selection of the number of data bits: 7 or 8.
48 User's Guide