Compuprint MDP40B - Manual (Page 50)

46
The Vertical Offset Tuning values correspond to 1/60 inches and set the vertical offset of
the first print line starting from the default standard position at 1 mm from the upper paper
margin.
The Horizontal Offset Tuning values correspond to 1/60 inches and set the horizontal
offset of the first print line starting from the default standard position at 3 mm from the left
paper margin.
If you need to change the default position of the first print line the vertical offset can be set in
the Vertical Position Offset lines and/or the horizontal offset in the Vertical
Position Offset
lines. Both these values correspond to 1/10 inch values.
1 m m
3 m m
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X
Vertical O ffset Tun ing
Vertical O ffset Tun ing
V ERT. D EF. P OS
H O R IZ
D E F.
P OS
H orizon tal O ffset Tun ing
= F IR S T P R IN T P O S IT IO N
3. Fill in the marker corresponding to the value you want to set and reinsert the sheet into the
printer. The printer reads the selected values and sets them.
4. Turn the printer off.