Compuprint MDP40B Programmer Manual - Manual (Page 163)

C-21
If the LF+CR feature has been selected in the printer Set-Up, the printing position is
set at the left margin.
The command is not accepted if:
• the new position lies in the bottom of form area or off the form (the line is printed).
• It is sent without a document inserted.
FF
Form Feed (rear ejection). (Olivetti PR2, PR40+)
ASCII Code FF
Hexadecimal Value 0C
Decimal Value 12
Prints the current line and ejects the document from the rear of the printer.
If the LF+CR feature has been selected in the printer Set-Up, the printing position is
set at the left margin. If there is no document present, it is ignored.
CR
Carriage return. (Olivetti PR2, PR40+, 2845)
ASCII Code CR
Hexadecimal Value 0D
Decimal Value 13
Prints the current line and sets the printing position at the left margin.