CompX eLock Latch Upgrade - Manual

Refrigerator Kit
1
CompX eLock • compx.com
Included in this kit are
(shown left to right, top to bottom):
k Refrigerator lock housing
k Motorized latch
k Refrigerator housing back cover
k Three (3) pieces of mounting tape
k Strike
k Two (2) bezel mounting screws
k Four (4) latch mounting screws
k Four (4) washers
k Two (2) strike cover machine screws
k Four (4) housing cover screws
k Eight (8) sheet metal mounting screws
Tools needed:
k #2 Philips driver
k T15 pin-in-head Torx driver
Below are instructions for upgrading a refrigerator kit to the new latch. Contact CompX Security Products at 864.297.6655
with any questions or for additional help.