Comtech EF Data MPP70 Hardware Kit for CDM-570L - Manual

Copyright  2011 Comtech EF Data -1- (Part Number AN-MPP70HWKIT) Rev 0
MPP70 Hardware Kit
Installation Instructions
for CDM-570L Modem
Application Note
P/N: AN-MPP70HWKIT
Introduction
The MPP70 Hardware Kit supports the IP Module for the CDM-570L modem. The Kit can be installed at the
factory or added as a field-installed upgrade to CDM-570L modems currently deployed.
Kit Contents
Upgrade Kit Part Number KT/10922-70
HW/SEM440X1/4PH 4 each 4-40X1/4 SQ CONE PAN HD PHIL SS
PL-0001216 1 each MODEM PACKET PROCESSOR
PL/9396-1 1 each Cable – RJ11 to 9-Pin DSUB
Installation instructions 1 each
CAUTION: Obey precautions for handling electrostatic-sensitive devices.
CAUTION: Make sure that all of the pins are accurately aligned when you are installing
the MPP70 board.
Figure 1. MPP70 correctly installed in the CDM-570L modem