Contemporary Control Systems BASgatewayLX - Manual (Page 4)

td100300-0Id
4
Environmental
Operating temperature: 0°C to +60°C
Storage temperature: –40°C to +85°C
Humidity: 10% to 95%, non-condensing
Ethernet Connector Pin Assignments
1 TD+ 3 RD+
2 TD– 6 RD–
(All other pins are unused.)
USB Pin Assignments (USB 2.0, Type A)
1 + 5 V
2 – Data
3 + Data
4 Ground
(This connector is reserved for future use.)
EIA-485 Connector Pin Assignments
+ Signal High
– Signal Low
SC Signal Common
COM 0V
SH Shield (Chassis)
EIA-485 Bias and Termination Jumpers (J5)
D Jumper Install jumper to apply pull-down bias.
T Jumper Install jumper to terminate bus.
U Jumper Install jumper to apply pull-up bias.
(All are installed by default.)
Figure 1 — RJ-45 Jack
Figure 3 — EIA-485 Connector
Figure 2 — USB Pins
Figure 4 — EIA-485 Jumpers