Contemporary Control Systems BASrouterLX Installation Guide - Manual (Page 4)

TD120100-0IC
4
Environmental
Operating temperature: 0°C to +60°C
Storage temperature:
–40°C to +85°C
Humidity: 10% to 95%, non-condensing
Ethernet Connector Pin Assignments
1 TD+ 3 RD+
2 TD– 6 RD–
(All other pins are unused.)
USB Port USB 2.0, Type A
This connector is for future use.
EIA-485 Connector Pin Assignments
+ Signal High
– Signal Low
SC Signal Common
COM 0V
SH Shield (Chassis)
EIA-485 Bias and Termination Jumpers
Install:
upper jumper for pull-down bias
lower jumper for pull-up bias
middle jumper to terminate bus
Figure 2 — EIA-485 Connector
Figure 1 — RJ-45 Jack
Figure 3 — EIA-485 Jumpers