Contemporary Control Systems EISC Configurable Switches Installation Guide - Manual (Page 2)

TD021000-0IF
2
Specifications
Electrical
INPUT DC AC
Voltage: 10–36 V 8–24 V
Power (max): 12 W 12 VA
Frequency: N/A 47-63 Hz
Relay Contacts: 24 V, 500 mA
LED Indicators
Power: Green
Link/Data: Green/Yellow
Status: Green
Regulatory Compliance
CE Mark
CFR 47, Part 15 Class A
UL 508 Listed (intended for use
with Class 2 circuits)
Environmental
Operating temperature: 0°C to +60°C
Storage temperature:
–40°C to +85°C
Humidity, non-condensing: 10 % to 95 %
Functional
Aging (typical): 300 seconds
Compliance:
ANSI/IEEE 802.3
RJ-45 Connector Pin Assignments
PIN MDI-X Port 16X
1 TD+ RD+
2 TD– RD–
3 RD+ TD+
6 RD– TD–
(All other pins are unused.)
Signalling 10BASE-T/100BASE-TX
Data Rates 10/100 Mbps
Port Count 16
Connectors RJ-45, shielded
Segment length (max) 100 m
Mechanical
Warning: This is a Class A product. In a domestic environment the product may cause radio
interference in which case the user may be required to take adequate measures.