CREATOR CROSS Series - Manual (Page 47)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
41 CROSS series mixed matrix switch User 's Manual CROSS Series Mixed Matrix Switcher User 's Manual
ASCII
Instructions
(Computer to the
matrix)
Command functions
Return(matrix to
computer)
For example
Set network error Out of range!
Set network
successfully
NETSET:OK
Note: it will return to "Out of range!" when set network error and returns "NETSET: OK." when set
network successfully
System inquiry instructions
ASCII
Instructions
(Computer to
the matrix)
Command functions Return(matrix to computer) For example
/^Version;
Inquiry matrix system
version
[X4] /^Version;
/*Type; Inquiry matrix type [X5] /*Type;
<^SPORT> Inquiry matrix port SPORT:[X12] <^SPORT>
<^SIPR> Inquiry matrix IP SIPR:[X12].[X13].[X14].[X15] <^SIPR>
<^SUBR>
Inquiry matrix subnet
mask
SUBR:[X12].[X13].[X14].[X15] <^SUBR>
<^GAR> Inquiry matrix gateway GAR:[X12].[X13].[X14].[X15] <^GAR>
<^SHAR>
Inquiry matrix hardware
address SHAR:[X12].[X13].[X14].[X15].[X16].[X1
7]
<^SHAR>
Common settings command
ASCII
Instructions
(Computer to
the matrix)
Command functions
Return(matrix to
computer)
For example
Standardswitch. Switch to standard mode
STANDARDSWITCH
! Standardswit
ch.
Fastswitch. Switch to a fast mode (default) FASTSWITCH! Fastswitch.
RWEDID.
Load the first output port of the EDID to all
input port EDID-OK!( success)
EDID-FAIL!(Failure)
RWEDID.
DefaultEDID.
Restore the system default EDID to all
input port
EDID-OK! DefaultEDID.
[Y1]D[X1],
[X2],…[Xn].
Read the monitor EDID connected to port
[Y1] to the input port [X1], [X2],... , [Xn].
When the output port [Y1] equals 0,it
means that restores the default EDID to
the corresponding input port
EDID-OK!( success)
EDID-FAIL!(Failure)
1D1,2,3,8.