Cybex 18010 Bravo Press User Manual
Page 14
Advertising
14
Cybex Owner’s Manual
Cable routing
1. Position pulley mount parallel to the top weight.
2. Pull down on pulley mount until cable is tight.
3. Verify cable is still routed through all pulleys.
4. Attach pulley mount to lifting post using a hammer and spiral pin.
Spiral
pin
5. Lift top weight up and down simulating normal operation (without selecting any resistance).
6. Verify the cable is moving smoothly.
Install back panels
Verify proper operation
Advertising
This manual is related to the following products: