Cybex 770C Cycle Cybex GO - Manual (Page 30)

Cybex Owner’s Manual
30
4. Set Date and Time.
5. Tap NEXT.
6. Go to Channel configuration.
Test network
1. Tap TEST NETWORK.
1 2 3
Description
1 TEST NETWORK
2 INSTALL
3 NEXT
2. When network test passes, tap INSTALL. If network test fails, check the network connections
and retry.
3. Tap NEXT.
TV configuration
The TV configuration only needs to be performed on the first unit installed. Configure the first unit
completely, save the configuration, then assemble and configure all other units.
1. Select Analog/Digital Cable and tap NEXT. This will scan for all available channels. The scan
can take 20 minutes to complete.