License plate bulb replacement, Headlight aiming, Fluids and capacities – Dodge 2006 JR41 Stratus Sedan User Manual

Page 246

Advertising
background image

License Plate Bulb Replacement

1. Locate both small slots on the outboard side of the
license lamp. Using a small screwdriver, remove the
entire housing.

2. Turn the bulb socket counterclockwise to remove it
from the housing. Pull the bulb out of the socket. Replace
the bulb and snap it back into place on the housing of the
chrome appliqué.

Headlight Aiming

The headlights on your new vehicle were aimed at the
factory. The factory setting was made at a no load setting.
A great increase in weight will change the aiming and it
may be necessary to readjust the headlights if carrying an
excessive amount of weight in the trunk, rear seats or
pulling a trailer. To readjust the headlights first mark the
position of the headlights on a wall prior to loading the
vehicle. Load the vehicle and then readjust the headlights
to the original position. If any further adjustments are
necessary contact your manfacturer’s dealer. A detailed
service procedure is contained in the manufacturer’s
Service Manual. Information on purchasing a Service
Manual can be found at the back of this Owner’s Manual.

FLUIDS AND CAPACITIES

U.S.

Metric

Fuel (approximate)

2.4 and 2.7 Liter Engines (87 Oc-

tane)

16 Gal-

lons

61 Liters

Engine Oil-With Filter

2.4 and 2.7 Liter Engines (Refer

to the engine oil fill cap for the

correct SAE grade)

5 qts.

4.7 Li-

ters

Cooling System *

2.4 Liter Engines* (Mopar

Antifreeze/Coolant 5 Year/

100,000 Mile Formula) or

equivalent.

8 qts.

7.5 Li-

ters

2.7 Liter Engines (Mopar

Antifreeze/Coolant 5 Year/

100,000 Mile Formula) or

equivalent.

9.5 qts.

9.0 Li-

ters

* Includes 1 qt. for coolant tank.

246

MAINTAINING YOUR VEHICLE

Advertising
This manual is related to the following products: