Cybex MG 525 - Manual (Page 7)

Cybex MG-525 Owner’s Manual
Service
Page 1-1
Safety
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper
operation of the equipment and review all labels.
WARNING: Serious injury could occur if these safety precautions are not observed:
User Safety Precautions
Obtain a medical exam before beginning any exercise program. •
Stop exercising if feeling faith, dizzy or experiencing pain and consult your physician. •
Obtain instructions before using. •
Read and understand the owner’s manual and all warnings posted on the machine before using. •
Keep all children (12 and under) away. Teenagers (13 and over) and disabled must be supervised. •
Keep body and clothing free from and clear of all moving parts. •
Use the machine only for the intended use. • DO NOT modify the machine.
Inspect machine prior to use. DO NOT use if it appears damaged or inoperable. •
Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn, •
frayed or damaged.
DO NOT • attempt to fi x a broken or jammed machine. Notify fl oor staff.
DO NOT • use if guards are missing or damaged.
Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer. •
If unsure seek assistance.
Never pin the weights in an elevated position. • DO NOT use this machine if found in this condition. See
assistance from fl oor staff.
DO NOT • use dumbbells or other incremental weights, except those provided by the manufacturer.
Report any malfunctions, damage or repairs to the facility. •
Replace any warning labels if damaged, worn or illegible. •
Facility Safety Precautions
Read the Owner’s Manual carefully before assembling, servicing or using the equipment. •
Securely anchor each machine to the fl oor using the anchor holes provided in each machine. •
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using fl at washers.
1 - Safety