Cybex 16085 Plate Loaded Chest Press - Manual (Page 7)

Assembly
Machine Specifications
Total Weight and Size: Plate Loaded Chest Press 16085
Machine Dimensions in Use Machine Dimensions at Rest Weight
same 59” L x 50” W x 52” H 192 Lbs
same 150 cm L x 127 cm W x 132 cm H 87 Kg
Maximum Training Weight Maximum User Weight
540 lbs/244 kg 300 lbs/135kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate
clearance around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by
48 inches and be served by an accessible route for at least one of each type of exercise equipment. If
the clear space is enclosed on three sides (e.g., by walls or the equipment itself), the clear space must
be 36 by 48 inches.
All other machines must have a clear floor space of 23” for all access point on the machine, unless
shown in the Owner’s Manual.
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in
use) dimensions.
Page 7 of 16
Plate Loaded - Chest Press Part Number 16085-999-4 A