Belt adjustment – Cybex 12010 VR3 Overhead Press User Manual
Page 22
Advertising
22
Cybex Owner’s Manual
Belt Adjustment
Tools Required
•
7/32” Wrench
•
Torque wrench (lbs-in)
Belt Adjustment
Action
Loose Belt
1. Using a 7/32” Allen wrench loose set screws.
2. Pull belt tight.
3. Secure belt in place with set screws.
4. Torque set screws to 300-350 lb-in.
5. Verify that the belt is moving smoothly and is routed straight from
the top pulley bracket to the to weight belt clamp
Advertising
This manual is related to the following products: