D.T. Systems H2O 1810 PLUS with SmartLED - Manual (Page 7)

7
Intensity Selection Dial - The
intensity selection dial can be set from
level 1 to level 16 to find the exact
stimulation level for your dog (see
page 18).
Transmitter Indicator Light - When pressing any of
the Transmitter buttons, the SmartLED lights green if
there is 51% to 100% charge remaining, lights red if
there is 21% to 50% charge remaining, or flashes
rapidly if the battery needs charging. When the
charger is plugged into the Transmitter, the SmartLED
lights red while charging and turns green when
charging is complete.
PARTS & FUNCTIONS
‘Nick’/Continuous Stimulation Buttons - Pressing
the upper button (‘NICK’) makes the collar emit a
Momentary (or ‘Nick’) Stimulation. Pressing the lower
button (‘CONT’) emits a Continuous Stimulation as
long as the button is being pressed (up to an 8 second
safety cutoff). All H
2
O PLUS series models have
these buttons.
Collar Selecting Switch - Switching between collar
units can be controlled by toggling the Collar Selecting
Switch to the desired unit.
Buttons #1 & #2 (H
2
O 1820 PLUS only) - Pressing
the Vibration Button (#1) makes the collar vibrate only.
Pressing the V+S Button (#2) makes the collar vibrate
first and adds simultaneous Continuous Stimulation to
the Vibration after a 1/2 second delay.