D.T. Systems H2O 1810 - Manual (Page 15)

15
TRAINING INTENSITY LEVEL
Setting the Jump Stimulation Level:
(H
2
O 1830/1832/1833 only)
1. Set the intensity level to the level that you would
like it to “jump” to
2. On the transmitter, press and hold buttons #1 and
#2 (‘Jump’ and ‘Rise’ buttons) at the same time.
3. When you see the LED flashing, release both but-
tons. The number of times the LED light flashes
shows you the intensity level for the Jump Stimula-
tion.
4. Like the Rise stimulation, the intensity level will
return to its original setting after the Jump feature
has been used.
CAUTION
To avoid accidentally shocking your dog, please make sure that
the collar is NOT on the dog while setting the jump level. If the
two buttons are not pushed at the EXACT same time, you will
run the risk of emitting a shock.