Daktronics Single Section DistaView Outdoor LED Scoreboards Generation IV - Manual (Page 14)

Introduction 1-5
Each of the sections in this manual contains model-specific information, including
physical dimensions, digit configuration, and power requirements. The scoreboard
engineering drawings, located in Appendix A, also list dimensions, weight, and
mounting instructions for each display. Additionally, scoreboard model number and
electrical requirements can be found on a label on the scoreboard entrance panel.
Cabinets for the displays are constructed of heavy-gauge aluminum. Digit and
indicator faceplates are black, and they are set directly into the scoreboard surface.
The outdoor LED scoreboards have been designed for use with an All Sport
® 5000
Series control console; displays equipped with team name message centers require
an All Sport 5000 Series controller. Both consoles use All Sport keyboard overlays
(sport inserts) for game control, and the boards operate without modification on All
Sport 5000 signal protocol. Refer to the following controller manuals for operating
instructions:
• ED-11976: All Sport 5000 Series Control Console Operation Manual
1.4 Model Names
Daktronics scoreboards are differentiated by their model numbers: BA-2718, for
example, designates a specific baseball scoreboard. The two-letter prefixes for
scoreboards in this manual include the following: BA – baseball; CT – counter; FB
– football; MS – multisport; RO – rodeo; SO – soccer; and TI – timer.
1.5 Product Safety Approval
Daktronics outdoor scoreboards are ETL and CE listed and tested to CSA standard
for outdoor use. Contact Daktronics with any questions regarding testing procedures.