Daktronics AF-3165-34-RGB - Manual (Page 59)

Maintenance and Troubleshooting
4-17
Display is stuck on bright or dim. • Check Manual/Auto dimming in Venus 1500
software.
• Check light detector cable.
• Check the address on the Light Sensor
• Check light detector for obstructions.
• Replace the light detector.
• Replace the controller.
4.10 Initial Operation Information
Every time the display is operated, the display will run through an initialization in
which it will display the following:
1. Product Name (Galaxy®)
2. Display Size (Row x Column)
3. Shading (32K RGB)
4. Bootloader Version (OS X.XX)
5. Firmware Number (ED-13305)
6. Firmware Revision (Rev X.XX)
7. Hardware Address (HW:XX)
8. Software Address (SW:XX)
9. IP Address: (172.16.192.25)
10. Subnet Msk: (255.255.0.0)
11. COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12. Line Frequency (CLK:60 Hz)
13. Display Name Description