Daktronics G-100-7.6-R - Manual (Page 29)

Appendix A: Optional Temperature Sensor
The multi-line InfoNet displays may be ordered with an
optional temperature sensor (0A-1151-0002). Follow the
supplied mounting instructions to attach the temperature
sensor and housing.
Figure 20: Temperature Sensor Cable
Connection
The temperature sensor cable connects to the back of the
display using the removable green jack (refer to Figure
20).
The pin orientation of the jack is shown in Figure 21.
Appendix A
A-1
Connect the temperature sensor cable to the jack as follows:
Figure 21: Pin Orientation
Display Cable Wires Temperature Sensor
Pin 1 Green P
Pin 2 White N
Pin 3 Red +V
Pin 4 Black GND
Pin 5 Bare N/A