Dataprobe RSS Series - Manual (Page 17)

V130816E.R1 RSS Series Page 17
get powersupply Get the current state of the power supplies
RSS-16> get powersupplies
Power Supply 1: Fail
Power Supply 2: Ok
Ok
RSS-16>
get upgrade enable
set upgrade enable <yes|no> Set firmware upgrade enable flag
no
get mac
set mac <XX:XX:XX:XX:XX:XX> Set network MAC address
get network Get network IP settings
RSS-16> get network
IP Mode: Static
IP Address: 10.10.10.70
Subnet: 255.255.255.0
Gateway: 10.10.10.7
DNS1: 0.0.0.0
DNS2: 0.0.0.0
Ok
RSS-16>
set ipmode <static|dhcp> Sets the IP Mode
Static: The IP address is set manually
DHCP: The IP Address is set by DHCP Server
static
set ipaddress <xxx.xxx.xxx.xxx> Sets the IP Address in dotted decimal 192.168.1.254
set subnet <xxx.xxx.xxx.xxx> Sets the subnet mask in dotted decimal 255.255.255.0
set gateway <xxx.xxx.xxx.xxx> Sets the gateway in dotted decimal 0.0.0.0
set dns1 <xxx.xxx.xxx.xxx> Set network DNS server 1 IP address 0.0.0.0
set dns2 <xxx.xxx.xxx.xxx> Set network DNS server 2 IP address 0.0.0.0