Devolo MicroLink ISDN Router - Manual (Page 10)

Connection and installation
|
| devolo MicroLink ISDN Router & MicroLink dLAN ISDN Router |
10
EN
2 Connection and installation
In this chapter, we will explain the displays and connections of the MicroLink
(dLAN) ISDN Router and show you how to set up the device and connect com-
puters as well as other network devices. A couple of network examples are
illustrated at the end of the chapter.
2.1 Display and connections
Only for MicroLink
dLAN ISDN Router
dL
AN
³ dLAN Link Lit when connected to another dLAN adapter.
· dLAN Act Flashes during data transfers via dLAN.
» Power Lit when the device is switched on.
IS
D
N
¿ S0 Lit when the ISDN bus is active.
´ Link/Act Lit when ISDN connection is active, flashes during data
transmission (Link = connection, Act = activity).
² Multilink Lit when channel bundling is active.
LA
N con
nec
tions 1 to 4
¶ Link/Act Lit when a computer (or hub/switch) is connected to the
device. Flashes during data transfers in the LAN.
º FD/Col Lit in full duplex mode, flashes during data collisions (FD =
Full Duplex, Col = Collision).
¾ 10/100 10 or 100 Mbps. Lit when data transfer rate is 100 Mbps.
³
·
»
¿
´
²
¶
º
¾