Rear tail, turn signal, and backup lamps – Dodge 2010 Caliber User Manual

Page 430

Advertising
background image

7. From behind the front fascia disconnect the engine
compartment wire harness connector from the front fog
lamp bulb connector receptacle.

8. Firmly grasp the bulb by the two latch features and
squeeze them together to unlock the bulb from the back
of the front fog lamp housing.

9. Pull the bulb straight out from the keyed opening in
the housing.

Rear Tail, Turn Signal, and Backup Lamps

1. Remove the two push-pins from the tail lamp housing.

7

MAINTAINING YOUR VEHICLE

429

Advertising
This manual is related to the following products: