Connectors – DFI ML905-B11C/B16C User Manual
Page 18
Advertising
18
2
Hardware Installation
Connectors
COM Express Connectors
The COM Express connectors are used to interface the ML905-B Micro COM Ex-
press board to a carrier board. Connect the COM Express connectors (lcoated
on the solder side of the board) to the COM Express connectors on the carrier
board.
Refer to the “Installing ML905-B onto a Carrier Board” section for more informa-
tion.
Refer to the following pages for the pin functions of these connectors.
COM Express Connectors
Advertising