DFI QB700-B - Manual (Page 14)

14
2
Hardware Installation
System Memory
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk
drives, add-in boards, and other components. Perform installation proce-
dures at an ESD workstation only. If such a station is not available, you
can provide some ESD protection by wearing an antistatic wrist strap
and attaching it to a metal part of the system chassis. If a wrist strap
is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
DDR2
1Gbit x8
The system board is equipped with memory down (single 32-bit channel) that
support DDR2.
DDR2
1Gbit x8