DFI EL339-B - Manual (Page 40)

40
2
Hardware Installation
Parallel
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Configure the Serial ATA drives in the Integrated Peripherals submenu (“OnChip
IDE Device” section) of the BIOS. Refer to chapter 3 for more information.
SATA (Serial ATA) Connectors
SATA 4 SATA 3
SATA 2 SATA 1
1
RXN GND
TXP TXN
GND
7
RXP GND