DH Satellite NPRM Mount 1.2M 1.5M & 1.8M - Manual (Page 2)

Tab to antenna
Dish to ring, will attach every other hole
opposite of the feed struts.
Photo 1A Ring to Base
Extension bar and tabs Slide bar to tray
Feed rods or struts. Ku1 Style shown. Other
styles available however key factor is to
measure the f/l to be 21 7/8” from center of
dish to the throat of feedhorn. All strut
assembly will be placed every other hole.
Measure from feedhorn
when attached to center of
dish. Note. This is the feed
collar only shown. Feed
horn needs to be attached to
measure correctly.
4A
NPRM Mount page 2
3A