Diamond Amplification Hammersmith User Manual
Page 6
HAMMERSMITH OWNER’S MANUAL
PAGE 2 OF 15
FRONT PANEL
REAR PANEL
MAKING CONNECTIONS
Power. As always, plug your power cable in first.
Your amp can be wired for any voltage. This allows you to take your amp all over the world
and ensure you’re ready for the voltage you need. Rewiring for an alternate voltage should
only be done by a qualified technician.
Speakers. Your DA product comes equipped with two speaker jacks. Always ensure, when
connecting speakers, that you use a high quality speaker cable. Never use instrument cable
to connect your amp to speakers and never put effects between your amp and speakers.
If you are using one speaker cabinet, you can plug into either speaker jack. Make sure your
impedance selector is set to the same impedance as the speaker cabinet. If you are unsure
of the impedance of your speaker cabinet, please find out before making your connection.