Denon 1083 - Manual (Page 69)

69
Checking the preset stations
1 Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2 Press the MEMORY button.
3 Press the SHIFT button and select
the desired memory block (A to E).
4 Press the CHANNEL + (UP) or –
(DOWN) button to select the
desired preset channel (1 to 8).
5 Press the MEMORY button again
to store the station in the preset
memory.
(Remote control unit)
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
• The preset (broadcast) stations can be checked on the on screen display.
1 Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset Stations” screen appears
on the OSD.
Preset memory
1
AMP
2, 5
3
4
(Remote control unit)
(Remote control unit)
(Remote control unit)