DNF Controls 4000CL-LPH - Manual (Page 8)

8 8 4000CL-LPH, 400 Clip Fast Access System, Louth Phillips Protocol
7. CREATE NEW CLIPS
a. Press
[CLIPLIST]. The LED above the CLIPLIST key lights up.
The display will show “CREATE NEW CLIP”.
b. Press
[LOAD]. The display will show the default CLIP ID.
c. Press [LOAD] to accept the default CLIP ID.
OR
Use the [NEXT CUE], [LAST CUE] keys and Wheel to edit the CLIP ID.
Use the [NEXT CUE] and [LAST CUE] keys to position the cursor.
Turn the Wheel to select the desired letter.
OR
Press [LOAD] followed by a maximum of eight (8) digits, using the numeric keypad.
d. Press
[LOAD] or [ENTER] to create the selected CLIP ID.
e.
If the selected CLIP ID already exists, a warning message will be displayed. To load the
existing clip, press [ENTER]. Press [ESC] to exit without loading the existing clip.