DNF Controls Tally Manager - Manual (Page 15)

Page 15 of 16
10) In the Prefix Selection column, select the Prefix configuration that will be used on
that UMD.
ii. None – No Prefix will be displayed.
iii. Fixed – A fixed text will be displayed in front of the System Source
Name (SSN) or Alias.
iv. Alias – The Alias will be displayed in front of the System Source Name
(SSN).
v. SSN – The System Source Name (SSN) will be displayed in front of the
Alias.
11) If Fixed Prefix is selected, enter the fixed text in the Prefix column.
12) Repeat steps 6 through 11 for all monitor wall inputs.
13) Press the “SAVE_ALL” button to save the entered changes, or press the “Back”
button to return to the previous page and discard all changes.