DR Power 42 Grader/Snow Blade - Manual

DR
®
FIELD and BRUSH MOWER
GRADER/SNOW BLADE INSTALLATION
AND OPERATING INSTRUCTIONS
The Grader/Snow Blade is designed to distribute loose soil or gravel and to clear snow from hard surfaces.
The diagram and Parts List below show all the items that should be included with your attachment. Please
take a moment to review the contents of your package before starting your installation to insure that all parts
have been included.
Ref # Part #
Description
1 160001 Swivel Attachment
2 160011 Blade
3 160021 Wear Edge
4 157491 Skid
5 157451 Washer, Flat, 5/8" USS
6 157471 Bolt, 1/4" -20 x 1", Carriage
7 157441 Bolt, HCS, 5/8" – 11 x 2-1/4"
Ref #
Part # Description
8 150721 Bushing, 1.38" ID x 1.63" OD
9 157481 Pin, Bent Arm, 1/2" x 3"
10 110731 Nut, Nylon Lock, 1/4" -20
11 157461 Pin, Detent Ring, 1/4" x 3/4"
12 101311 Nut. Nylon Lock, 5/8 - 11
13 160031 Pin, Hitch Clip, 1/2"to 9/16"
(over please…)
DISCONNECT SPARK PLUG WIRE BEFORE PERFORMING THIS
INSTALLATION.
DR ® GRADER/ SNOW BLADE ATTACHMENT
©2005 CHP, INC. 157831A