Drake PC1201 Passive Combiner – 1GHz - Manual

The PC1201 Passive Combiner permits combining the
outputs of up to 12 Audio/Video Modulators, Channel
Processors, etc. onto a single coax. Additional
PC1201's may be used, with their outputs combined,
to increase capacity as required.
1
12 WAY PASSIVE
12 INPUTS
(up to +60 dBmV
each input)
MONITOR OUTPUT
-20 dB
SPECIFICATIONS
Frequency Range:
Insertion Loss:
Port-port Isolation:
Maximum Input:
Impedance:
Return Loss (all ports):
Monitor Test Point:
Shielding:
Operating Temperature:
Size:
5-1000 MHz.
14 dB nominal, 17 dB maximum.
30 dB nominal, 25 dB minimum.
+60 dBmV, each input.
75 Ohms.
20 dB nominal, 15 dB minimum.
-20 dB, ±2 dB (referenced to output).
Meets FCC Part 76 requirements when operated at rated input levels.
-20 0 C to +50 0 C.
19" W x 1.75" H x 3.7" D.
The unit mounts in a standard 1-3/4" H x 19" W rack
space. A Monitor output is provided at the front panel
of the combiner.
FRONT PANEL
REAR PANEL
BLOCK DIAGRAM
® is a registered trademark of the R.L. Drake Holdings LLC
© Copyright 2013 R.L. Drake Holdings LLC P/N : 651331600A Printed in China.
PC1201 Passive Combiner
1 OUTPUT
-20 dB
MONITOR
RF OUTPUT
Rev: 20130227
1003660