Eclipse Rackmount ERL Series - Manual (Page 8)

Page 08 -- ML08V02A -- www.EclipseRackmount.com
■
Tighten all 8 pcs of M6 screw to complete the
installation.
Complete the installation
Step
4
< 1.3 > Installation - How to install 1U 20" LCD Tray
Left bracket
■
Attach the left and right mounting bracket to
rack 19" mounting rails.
■
Adjust the mounting bracket to f t your rack.
■
M6 screw x 8 pcs included.
Step 1
Right bracket
Front side
Rear side
Leave all M6 screws slightly loose, until
you complete the installation in step 3
Step
2
■
Pick up the LCD tray.
■
Insert the LCD tray into the mounting bracket.
■
Pull and hold the left & right black arrow buttons
on the rails.
■
Return the LCD tray to park position.
Mounting bracket
Black arrow button
■
Fix the rear kit to the mounting bracket with M3.2
screw x 4 pcs included.
Step
3
This step is necessary. Failure to complete this
will cause damage.
Front side
Rear kit
M3.2 screw
M6 screw