Dynex DX-WD1202 - Manual (Page 10)

10 DX-WD1202
Need help? Call 800-305-2204
Step 4:
Carefully turn the ends over so the sides with the hidden cams face up.
Attach the unattached leg (I) to the left end (A) and the unattached leg (J) to the right end (A). See Step 2 for
instructions.
Insert a hole plug (AA) into the holes on the legs (I and J) that you just attached.
You’ll need:
This end will now be
referred to the left end.
This end will now be
referred to the right end.
Flatblade screwdriver AA (2)