Daewoo Digital PVR DSD-9520 - Manual (Page 10)

9
SCART connections offer the best picture and sound quality.
They can also tell your TV when the Digital PVR is switched on and off and whether
widescreen pictures are being broadcast. Therefore this is the way this box has been
designed to be connected.
SETTING UP YOUR DIGITAL PVR WITH A SCART CABLE
CONNECTING THE PVR CONNECTING THE PVR
1. Connect your aerial to the Digital PVR.
• Make sure your TV is switched off, together with any other equipment you are connecting to it.
• Insert the cable from your aerial into the Digital PVR socket marked ‘AERIAL’.
• Connect the SCART cable between the ‘TV’ socket on your Digital PVR’s rear panel and your
TV’s SCART socket.
• Connect an RF cable between the ‘RF OUT’ output on the Digital PVR and the RF socket on
your TV (where you normally connect the aerial).
2. Connect the SCART cable.
Choose the option below that best suits your TV (and VCR, if you have one). If you need a longer
SCART cable, you can find one at most TV or electronics retailers.
Ask for a “fully-populated” SCART lead.
Option 1: connecting to a TV only
RF IN
RF OUT
L
R
AUDIO OUT
AUDIO OUT
TV
VCR
DVD
SCART Cable
RF Cable
(Not supplied)
AERIAL
TV
DSD-9520 2005.9.14 7:37 PM ˘ ` 9