ESI MI/ODI/O User Manual
Page 3
3
support 192kHz in specification, we got the reports shows possibility
while we were testing. However, it heavily depends on system
environment, It may have problem on over 100kHz sample rate.
You have to use high quality Optical cable otherwise you may get loss of
data or distortion.
2. External connector port
This port is for connecting MI/ODI/O add-on card to Waveterminal 192
series. MI/ODI/O add-on card makes Waveterminal 192 X &L a total of 4 in
8out Audio / 16 MIDI channel integrated audio interface. This port is
connecting for the exclusive external connection cable. This cable is
provided with the MI/ODI/O.
As next picture, the cable consists of total of 5 connectors. On one end,
there is an 8-pin connector to MI/ODI/O. The other end, there are two small
connectors for SPDIF digital In/Out port and large
connectors for MIDI interface In/Out. These 4 cables are labeled for easier
distinction.
3. Connector for Waveterminl 192 series
Using provided cable, connect MI/ODI/O and Waveterminal 192 series