ESI GIGAPort DG - Manual (Page 6)

6
4. Hardware Installation
Before you begin, make sure you have to read your computer’s manual on installing
USB devices. Your computer’s manual should describe the precautions you should take.
Shutting down computer wouldn’t need for installing an USB device to the computer.
However, we will take it from the start to make sure you can follow every detail
installation.
1. Turn off the computer.
2. Find USB port on your computer. USB port is looked like below. You can find it
by the PS/2 or serial ports on the back of desktop computer system
.
USB port on computer
3. Plug in GIGAPort DG’s USB cable (Series A plug type) to the USB port of your
computer.
USB series A plug
4. Turn on the computer. You can see on red light on GIGAPort DGs’ ADAT
digital output. GIGAPort DG gets the power from the computer via USB cable
so you don’t need to attach any external power supplier.
5.
After finishing connection between GIGAPort DG and your computer, you need
to connect from GIGAPort DG’s ADAT digital output to your external devices
such as ADAT machine through Optical mini cable.