ESI MIDIMATE II - Manual (Page 2)

Introduction
MIDIMATE II is a convenient USB 2.0 MIDI interface
cable with up to 32 input or 32 output channels for PC
and Macintosh systems. With
MIDIMATE II you can
obtain perfect MIDI timing and performance at an
extremly affordable price.
Features
- USB MIDI interface with 2 MIDI connectors, each can
- work as independent input or output
- high-speed connection to USB 2.0 or 1.1 equipped PC
- or Macintosh system
- bus powered, requires no external power supply
- no driver needed for Windows XP, Windows Vista,
- Windows 7 and Mac OS X
Description
MIDIMATE II is an adapter cable that connects the
USB port of your computer to any MIDI Input or MIDI
Output labelled connector on an external MIDI device.
Two MIDI connectors are provided by
MIDIMATE II .
Installation
To install MIDIMATE II , you need to find the USB port
on your computer. Make sure your computer is
switched on and simply connect the cable to the USB
port. No driver installation is required.
Under Windows XP, you can check if MIDIMATE II has
been installed by going to Control Panel > Sounds &
Multimedia > Audio > MIDI Playback. You will see 2
new USB MIDI entries in the MIDI port selection. Note
that this dialog no longer exists under Windows Vista /
7. Please start your MIDI application (like a sequencer
or notation software) to check the MIDI ports there.
Under Mac OS X, you can launch the Audio MIDI
Setup application.
MIDIMATE II will be listed under
MIDI Devices with 2 I/O ports.
Usage
Using MIDIMATE II with your applications could not be
easier. If you connect the MIDI cable to a MIDI Output
of an external device, signals will appear via MIDI
input in your software. If you connect it to a MIDI Input,
you can send signals to the external device via the
MIDI playback function of your software.