Technical data – ESI aktiv 08 Rev.B User Manual
Page 7
ESI
aktiv 08
7
Orientation
It’s very important to place the aktiv 08 vertically. Never place them horizontally.
Comments
Please also make sure to not place any obstacles that may block the flow of air or that could
generate sound reflections (especially highly reflective material including glass or metal) in front of
the monitor. Also, don’t put plants in pots on top or too close to your monitors. Keep a certain
distance to the wall behind the speaker, as it could block air flow.
4. Technical Data
Please note that technical specifications are subject to change without any prior notice. The specs
given in this manual are up-to-date at the time of the creation of this document.
Specifications
Model: aktiv
08
Type:
2-way powered speaker
System Type:
Active Studio Monitor Speaker
Dimensions:
358 mm (H) x 255 mm (W) x 322 mm (D)
Weight: 10.2
kg
HF Driver:
1" silk dome tweeter
LF Driver:
8" kevlar curved cone (magnetic shielding type)
Output Power:
90W (HF 30W, LF 60W), 130W AC consumption power
Working Voltage:
AC100-240V 50/60Hz, with 115V / 230V AC selection switch
Frequency Response:
40 Hz – 20kHz
Input Impedance:
23.3 kOhm balanced, 13.3 kOhm unbalanced
Crossover Point:
2kHz
SPL: 90dB+/-
3dB
Rated Noise Power:
60 Watt (THD=1%, 4ohm@1kHz)
Input Sensitivity:
130mV@1Watt, 1V@60Watt
Input Connectors:
XLR / TS1/4" combo connector, balanced / unbalanced input
Volume Control:
min - center - max
Indicator:
power LED on front panel, blue