Ii. features of the device (pic. 1), Iii. control features functions – ETA Kávovar Inesto User Manual

Page 20

Advertising
background image

20

GB

/ 40

– The producer does not guarantee any loss caused by improper handling of the

appliance and its accessories (e.g.

burning, scalding, breaking of the glass kettle,

fire) and its guarantee for the appliance does not apply in the case of non-compliance

with the safety instructions above.

II. Features of the device (pic. 1)

A – coffee maker

A1 – water tank lid

A5 – ON/OFF switch

A2 – water tank

A6 – control panel

A3 – watermark

A7 – supply cord

A4 – heating plate

B – removable filter holder with automatically closing valve DRIP-STOP

B1 - filter

C – glass kettle with lid

III. CONTROL FEATURES FUNCTIONS

HOUR

– hours setting button

MIN

– minutes setting button

PROG

– automatic coffee preparation setting button (timer)

ON/OFF

– start / stop button

AUTO

– automatic coffee preparation (timer) indicator

RUN

– coffee preparation indicator

Digital clock works with the time mode indicator within the range of 24 hrs. When plugging

the coffee maker in, the display will show 12:00.

Note

In case unusual characters appear on the display, unplug the appliance from the outlet

and plug it in again.

i

Hours setting

Press

PROG (CLOCK is displayed). Set the correct time by pressing or holding down the

HOUR button.

Minutes setting

Press

PROG (CLOCK is displayed). Set the correct time by pressing or holding down the

MIN button.

Note

If you are setting the hours and minutes at the same time, you can press the

PROG

button only 1x. The display must always show

CLOCK.

i

Setting the timer

Press the

PROG button twice (TIMER is displayed). Set your desired time of coffee

preparation by pressing the

HOUR and MIN buttons. Then press the ON/OFF button twice

(the red indicator

AUTO will light up). The timer function is programmed.

Advertising