ETA Dětský zubní kartáček Zubnička - Manual (Page 10)

III. INSTRUCTIONS FOR USE
Remove all packaging material and remove the toothbrush with accessories. Rinse the
parts that will come in touch with the oral cavity in clean hot water before first use.
Notes
For hygiene reasons we recommend every user using their own brush head.
You may use any quality tooth paste for cleaning your teeth. We do not, however,
recommend using special tooth pastes with whitening effects. In order to prevent spraying,
first put the brush on the teeth and then turn on the propulsion unit.
If you have undergone any surgical intervention in the mouth cavity, consult your dentist
before using the toothbrush.
During the first few days of using the toothbrush, your gums may bleed slightly which,
however, usually stops by itself after a few days. If the bleeding lasts longer than two
weeks, please consult your dentist.
Inserting batteries
Release the battery cover A3 on the bottom of the propulsion unit A by turning the control
A4 clock-wise into a position and remove the cover. Insert 2 pcs. of AAA batteries,
observing the +/- signs (see symbol). Replace the cover and arrest it by turning the control
into the position .
Use
Slide the brush head B slightly on the propulsion unit A so that its protrusions fit onto the
protrusions of the propulsion unit. Rinse your mouth thoroughly before cleaning your teeth,
put toothpaste on the brush head and moisten it. Position the brush against the teeth
so that it covers the surface of the teeth as well as the gum line. Turn the brush on by
pressing the I button.
Guide the brush slowly along the teeth and grinders, follow the curve of the gums and
the shape of the individual teeth. Hold the brush always on one spot for several seconds
before you move over to a next tooth. Make sure you have cleaned the whole surface of
the teeth (the inner and outer part of the occlusion area), as well as the line around the
gums (pic. 2). Do not press on the brush, leave it to do all the work by itself. Acquired
and permanently maintained procedure will prevent you from omitting some parts of the
teeth. Do the cleaning for at least 2 minutes which is the minimal recommended time
by stomathologists. You may use the timer C1 for this purpose If the plaque is removed
properly, the gums will gain pink colour and will surround the teeth fast.
Timer (C1)
The timer in the form of hourglass allows to control the length of teeth cleaning
(approx. 2 min.).
IV. MAINTENANCE
Clean the toothbrush regularly after each use! Do not use any rough and abrasive
cleaning agents! Wipe the surface with a soft damp cloth. Rinse the brush head
thoroughly for a few seconds under running water while leaving the propulsion unit on
(pic. 3). Turn the propulsion unit by pressing the 0 button, take off the brush head and rinse
both the parts in running water separately under running water (pic. 3) and let dry.
To achieve hygiene cleanliness we recommend immersing the brush head every 2 - 4 in
a cleaning agent for dentures.
10
GB