Exacq Enterprise System Manager User Manual - Manual (Page 36)

www.e x acq.com
Page 36 of 37
6/9/2015
When you select a Failover Group from the Failover Group List, information about the group is displayed:
Note the Failover Compatibility Issues section. Protected servers and spare servers in the same failover group do
not need to be identical, but certain differences could be important. For example:

If a spare server is licensed for 16 cameras and a protected server is licensed for 32 cameras, only the first
16 cameras that connect to the spare server after a failover are recorded.

If a spare server has less memory or hard drive space, recording performance could be reduced compared
to the performance on the protected server.

Servers with previous versions that do not support failover, or certain types of servers such as exacqVision
Edge servers, will be listed as Not Supported.