Digi 5220 - Manual (Page 2)

Featur
es/Specifications
91000714
B1/199
2-port 10/100 Mbps Switch, 2 UTP ports
MIL-5220TX
International MIL-5220TXIN
2-port 10/100 Mbps Switch, 1 UTP port,
one multi-mode fiber optic port with an
SC connector
MIL-5220FXC
International MIL-5220FXCIN
2-port 10/100 Mbps Switch, 1 UTP port,
one multi-mode fiber optic port with an
ST connector
MIL-5220FXT
International MIL-5220FXTIN
M O D E L / P A R T
N U M B E R S
© 1999 Digi International Inc. All rights reserved.
Digi, Digi International and the Digi logo are either trademarks or registered trademarks
of Digi International Inc. in the United States and/or other countries. All other trademarks
are the property of their respective holders.
D I G I S E R V I C E
A N D S U P P O R T
You can purchase with
confidence knowing that Digi is
here to support you with expert
technical support, a strong five-
year warranty and a 30-day
money-back guarantee.
F E A T U R E S
> Speed, mode and media
conversion
> 10/100 Mbps auto-negotiating
two-port bridge
> Fiber port that can be configured for
half- or full-duplex mode
> Fragment-free cut-through, standard cut-
through and store-and-forward switching
used in an adaptive cut-through
switching algorithm
> Back pressure that eliminates frame loss
when buffers are full
> Per port buffer of 160 Kbps
> Routing table that contains 4096 entries
to store node MAC addresses
> Indicator panel for configuring the
switch or monitoring the overall
condition of the switch
> Frame filtering and forwarding functions
for each port, which are capable of
filtering and forwarding 100% of all
Ethernet packets at line speed
> Per port LEDs for link, transmit, receiver
duplex mode and speed
> Latency of less than 20 microseconds
I N T E R F A C E S
5220TX
> Two UTP ports (two RJ-45 connectors
per port, MDI/MDIX)
5220FXC
> One UTP port (one RJ-45 connector
per port, MDI/MDIX)
> One multi-mode fiber optic port with
an SC connector
5220FXT
> One UTP port (two RJ-45 connectors
per port, MDI/MDIX)
> One multi-mode fiber optic port with
an ST connector
P O R T L E D s
> LNX indicates the port sees a LINK
signal detect
> TX indicates the port is transmitting
> RX indicates the port is receiving
> Full indicates the fiber port is
operating in full duplex
> 100 indicates the port is operating
at 100 Mbps speed
Digi Internationa l
11001 Bren Road E.
Minnetonka, MN 55343
U.S.A.
http://www.dgii.com
Customer Support
and Technical Support:
North America:
800-344-4273
612-912-3456
support fax:
612-912-4958
Europe:
(+49) 231-9747-280
Hong Kong:
(+852)-2833-1008
Australia:
(+61)-2-9680-8944
e-mail:
[email protected]
R E G U L AT O RY A P P R O VA L S
> FCC Class A
> CE Mark
> EN55022 Class B
(CISPR 22)
> UL 1950
> CSA 22.2 No. 950
> EN60950 (TUV)
S Y S T E M L E D s
> PWR: Indicates the presence of
POWER on the unit
> Six display mode LEDs
E N V I R O N M E N T A L
> Operating temperature:
5ºC to 50ºC (41ºF to 122ºF)
> Relative humidity:
10% to 95% (non-condensing)
> Altitude: 0 to 3,660 m
(0 to 12,000 feet)
P O W E R R E Q U I R E M E N T S
(Internal supply)
> Ranging 110 VAC - 220 VAC,
50 - 60 Hz, 400 ma