Fire Magic Echelon Diamond Thermometer Guide User Manual
Echelon diamond thermometer quick start guide, Must, Supplement
REV 0 - 1201121549
L-C2-369
080
MENU
SET
05:00
350
075
078
350
078
350
170
PROBE
TEMP
ZONE
3
ZONE
2
ZONE
1
SET
ACT
°F
ACT
SET
This guide serves as a
supplement
to the thermometer
information found in your grill main instructions. Read all
instructions completely and carefully prior to product use.
YOU
MUST
READ THE ORIENTATION SECTION PRIOR TO DIGITAL THERMOMETER OPERATION.
080
MENU
SET
05:00
350
075
078
350
078
350
170
PROBE
TEMP
ZONE
3
ZONE
2
ZONE
1
SET
ACT
°F
ACT
SET
MASTER SWITCH & MEAT PROBE DETAIL
MEAT PROBE
Meat probe handle
Meat probe plug
MENU
SET
Arrows for adjusting/scrolling
SET button
for selecting &
confi rming
This is the
display screen
Timer button
Light button
Menu
button
I
ORIENTATION
Familiarize yourself with the thermometer, master switch, meat probe, and default screen.
MASTER SWITCH
(must be ON to operate
electrical components)
1. Master
switch must be turned ON for all electrical components on your grill to operate. Turning Master switch off will shut down all electrical components.
2. Pressing any button will turn on the thermometer. Thermometer will automatically shut off after 5 minutes if no temperature change is detected.
3. You must turn thermometer on to turn interior and knob lights on. Automatic thermometer shutdown will not shut off these lights; they must be manually
shut off (via the light button) as instructed in this guide.
4. BE SURE TO CALIBRATE YOUR THERMOMETER ON INITIAL USE (SEE BELOW).
DEFAULT SCREEN DETAIL (when on)
Time set via Timer
Meat probe temp. info
Cooking zones temp. info
THERMOMETER
SET = Desired Cooking Temp.
ACT = Actual Temp. Reading
080
MENU
SET
05:00
350
075
078
350
078
350
170
PROBE
TEMP
ZONE
3
ZONE
2
ZONE
1
SET
ACT
°F
ACT
SET
Press OFF (progressively)
1. Turn thermometer On. Press light button to turn
both interior and knob lights On.
2. Press light button once to turn interior lights off,
and a second time to turn knob lights off.
MENU
SET
F
C
TEMPERATURE
MENU
SET
SETUP F C
CALIBRATE
1. Press up/down arrow to SETUP F C.
Press SET.
2. Select as desired & Press SET, screen will return
to menu screen.
Press MENU to return to default screen.
IV
CHANGE TEMPERATURE UNITS
• Follow steps 1 & 2 of the previous section (Calibration), THEN:
Select as desired
Select
ECHELON DIAMOND THERMOMETER
QUICK START GUIDE
II
INTERIOR AND KNOB LIGHTS
III
CALIBRATE
THERMOMETER
080
MENU
SET
05:00
350
075
078
350
078
350
170
PROBE
TEMP
ZONE
3
ZONE
2
ZONE
1
SET
ACT
°F
ACT
SET
1. Turn thermometer On.
Press MENU button.
MENU
SET
SETUP
GRILL GUIDE
ALARM
BACKLIGHT
2. Press up/down arrow to SETUP.
Press SET.
Select
MENU
SET
SETUP F C
CALIBRATE
3. Press up/down arrow to CALIBRATE.
Press SET.
MENU
SET
SETUP
GRILL GUIDE
ALARM
BACKLIGHT
4. Thermometer will calibrate w/ambient
temp. and return to menu screen.
Press MENU to return to default screen.
Select
Press
MENU
SET
Press
Press ON