Floscan Pre-Installation Manual for Diesel Models User Manual
Floscan
Advertising
Table of contents
Document Outline
- Swivel Fittings
- Metals used for terminal studs, nuts, and washers shall be corrosion resistant and galvanically compatible with the conductor and terminal lug. Aluminum and unplated steel shall not be used for studs, nuts and washers. Terminal connectors shall be of the
- the voltage drop from terminal to terminal does not exceed 50 millivolts for a 20 amp current flow. The connection must be able to withstand a 6-pound tensile force exerted axially, for one minute.
- Twist on connectors, i.e., wire nuts must never be used.