Flowserve 955 Chemiepac - Manual (Page 10)

regulations regarding safety measures and protective clothing with respect to
this plant section must be observed and strictly adhered to. The operator must
ensure the proper disposal of the media collected when the machine is vented
or drained.
9.5 Carefully replace the removed MS in the original packaging (e. g. wooden crate) and
store or send this to FLOWSERVE for inspection.
10.0 SYSTEM CHECK
Routine maintenance of the MS extends to the monitoring of the set values for pressu-
re, temperature, and leakage quantity.
Routine maintenance must be conducted at suitable intervals to prevent soiling
in or on shut-off and throttle devices installed in the fluid supply.
10.1 Removing the MS for an inspection becomes necessary when:
- the specified leakage values are exceeded and, after enquiries at FLOWSERVE, no
other written agreement ensues.
- after an installation period of more than three years.
- an inspection of the pump is due, and a similarly long operating period is expected
thereafter.
11.0 MAINTENANCE, REPLACEMENT PARTS, AFTERSALES SERVICE
11.1 Repairs must be conducted by FLOWSERVE within the guarantee period. In special
cases (emergencies) competent personnel may replace individual parts in situ after
consultation with FLOWSERVE.
11.2 Replacement parts are to be ordered with the ID numbers given in the annexed
parts list.
11.3 A warranty is given only for the original replacement parts delivered by
FLOWSERVE. All parts of the MS meet with high-precision dimensional
tolerances and are matched to one another. Only a part replacement as
given in the FLOWSERVE quality assurance documentation ensures smooth
operation.
11.4 We expressly point out that original replacement parts and accessories not
delivered by FLOWSERVE are not tested or released by FLOWSERVE. Under
certain circumstances therefore, usind and / or installing such products may
impair the properties given in the MS design and hence undermine the active
and / or passive safety. All incidents of damage incurred through the use of
nonoriginal replacement parts or appurtenances render all liabilities and war-
ranties on the part of FLOWSERVE void.
Please note that special manufacturing and delivery specifications exist for all parts
-10-
!
!
!