Flowserve 420 IOM User Manual
User instructions, Installation operation maintenance safety manual, Logix
Advertising
Table of contents
Document Outline
- 1 GENERAL INFORMATION
- 1.1 Using This Document
- 1.2 Terms Concerning Safety
- 1.3 Protective Clothing
- 1.4 Qualified Personnel
- 1.5 Valve and Actuator Variations
- 1.6 Spare Parts
- 1.7 Service / Repair
- 1.8 Basic Operation
- 1.9 HART
- 1.10 Position Definition
- 1.11 Command Input and Final Command
- 1.12 Outer Loop
- 1.13 Inner Loop
- 1.14 Detailed Sequence of Positioner Operations
- 1.15 Inner Loop Offset
- 2 SPECIFICATIONS
- 3 HAZARDOUS AREA CERTIFICATIONS
- 4 STORAGE AND UNPACKING
- 5 MOUNTING AND INSTALLATION
- 6 TUBING
- 7 ELECTRICAL CONNECTIONS
- 8 STARTUP
- 9 POSITIONER FUNCTIONS (No Display Required)
- 10 POSITIONER FUNCTIONS (LCD Display)
- 10.1 Main Display View
- 10.2 Menu Overview
- 10.3 Menu Features
- 10.3.1 Status
- 10.3.2 Alerts and Alarms
- 10.3.3 Partial Stroke Test
- 10.3.4 Calibration
- 10.3.5 Configuration (Positioner Tuning)
- 10.3.6 Configuration (Characterization)
- 10.3.7 Configuration (Pressure Control)
- 10.3.8 Configuration (Soft Limits and Shutoff)
- 10.3.9 Configuration (User Preferences)
- 10.3.10 Configuration (Burst Mode)
- 10.3.11 Configuration (Positioner Revs)
- 10.3.12 Configuration (Factory Reset)
- 10.3.13 Language
- 11 HART COMMUNICATION
- 12 REQUIREMENTS FOR SAFETY INTEGRITY
- 12.1 Fail Safe State
- 12.2 Safety Function
- 12.3 Fail Safe State Response Time
- 12.4 Installation
- 12.5 Required Configuration Settings
- 12.6 Maximum Achievable SIL
- 12.7 Reliability data
- 12.8 Lifetime limits
- 1.1
- 12.9 Proof Testing
- 12.10 Maintenance
- 12.11 Repair and replacement
- 12.12 Training Requirements
- 13 MAINTENANCE AND REPAIR
- 14 TROUBLESHOOTING
- 15 POSITIONER DIMENSIONS
- 16 HOW TO ORDER
- INDEX